Untitled Document
| |
| Model DT12 (Drill-Tap) |
|
Total Stroke |
1.9, 3.9, 5.9 |
Drilling Capacity (in steel) |
3/8 |
Drilling Thrust (lbs) |
270 |
Air Pressure (PSI) |
90 |
Spindle RPM |
540 - 1080 / 888 - 1760 / 1080 - 2160 |
Std Motor (HP) |
.75-1.0 |
Opt Motor (HP) |
1.0-1.5 |
Tool Connection |
Spindle ER 16 tension chuck |
Feed Device |
Hardened Quill - Pneumatic |
Electrical Switches |
110V / 24V AC DC / NO.NC. |
Weight (lbs) |
39-48 |
|
|
|
| Product Features |
|
- Single pass drill-tap unit for use of combination tools
- 2-spindle head can be attached
- All switches and stop settings in the back of the unit--designed for
maximum operator safety (no pinch points)
- Brakemotor with two speeds for one-pass drilling operation
- Electrical control panel is optional
- For through holes, 1x tap diameter in material thickness
- Pneumatic feed with built-in hydraulic check
- Special collet chuck equipped for easy tap cycle setting
- T-belt drive, low RPM gear reducer option
|
|
| Product Images |
|
|
| DWG Files |
|
| | | dt12a.zip | dt12c.zip | dt12d.zip |
|
|
