|
ANGULAR | RIGHT ANGLE | ADJUSTABLE MULTISPINDLE | FIXED MULTISPINDLE
Untitled Document
| CNC ADJUSTABLE MULTISPINDLE |
| Description |
|
The unique feature of the MSBV line of multispindle drill
heads is their possibility to adjust the center to center step less to
fit your pattern. With the same drill head a whole variety of patterns
can be machined, making them affordable even for smaller series of parts.
Berger MSBV multispindle drill heads can be used for drilling and tapping,
two set-screws from the side hold the square end of the top.
Berger MSBV sets the new quality standard for adjustable multispindle
drill heads. The rigid bearing-system is based on roller-bearings only,
with each spindle honed in to provide a support with no play at all. MSBV
drill heads are made of specially selected high quality materials. The
spindles and shafts are hardened and ground/polished. The gears are made
of quenched steel and nitrate-hardened. |
| Options |
|
| |
| Applications |
|
Thanks to the special spindle nose with 2 set screws (to
secure the squared end of tap-shafts), Berger MSBV multispindle drill
heads are suited to both drilling and thread cutting.
MSBV multispindle drill heads are also suitable for the production of
small lots since innumerable drill patterns can be obtained with a single
drill head.
|
| Series |
|
 MSBV |
|
