ANGULAR | RIGHT ANGLE | ADJUSTABLE MULTISPINDLE | FIXED MULTISPINDLE

ANGULAR HEADS FOR MACHINING CENTER
Description
The tilting heads can be used for high performance rigid drilling, tapping and milling. The body is made of heat-treated aluminum alloy. The moving parts are made of alloy steel and run on roller bearings. The tool holder spindle can rotate and be positioned from 0° to 90°. The central shaft has an integral taper for maximum rigidity. The interchangeable anti-rotary pin offers the possibility of application on different machines. High precision and pliable use.
Applications
Conventional machines, boring machines, milling machines, tapping machines, special production transfer machines, drilling and punching machines, units, machining centers.
Options / Series Comparison / Product Images / DWG Files
CLICK HERE

RIGHT ANGLE HEADS FOR MACHINING CENTER
Description
The 90° angle heads with 360° positioning heads can be used for high performance drilling, tapping and milling. The body is made of heat-treated aluminum alloy. The moving parts are made of alloy steel and run on roller bearings. The tool holder spindle rotates and can be positioned from 0° to 360°. The central shaft has has integral taper for maximum rigidity. The interchangeable anti-rotary pin offers the possibility of applicable on different machines. High precision and pliable use.
Applications
Conventional machines, boring machines, milling machines, tapping machines, special production transfer machines, drilling and punching machines, units, machining centers.
Options / Series Comparison / Product Images / DWG Files
CLICK HERE

CNC ADJUSTABLE MULTISPINDLE
Description
The unique feature of the MSBV line of multispindle drill heads is their possibility to adjust the center to center step less to fit your pattern. With the same drill head a whole variety of patterns can be machined, making them affordable even for smaller series of parts. Berger MSBV multispindle drill heads can be used for drilling and tapping, two set-screws from the side hold the square end of the top. Berger MSBV sets the new quality standard for adjustable multispindle drill heads. The rigid bearing-system is based on roller-bearings only, with each spindle honed in to provide a support with no play at all. MSBV drill heads are made of specially selected high quality materials. The spindles and shafts are hardened and ground/polished. The gears are made of quenched steel and nitrate-hardened.
Options
Applications
Thanks to the special spindle nose with 2 set screws (to secure the squared end of tap-shafts), Berger MSBV multispindle drill heads are suited to both drilling and thread cutting. MSBV multispindle drill heads are also suitable for the production of small lots since innumerable drill patterns can be obtained with a single drill head.
Series
MSBV

CNC FIXED CENTER MULTISPINDLE
Description
All heads are engineered based on a standardized design system on spindles, bearings, and gears. This system allows fast delivery of these specially built heads, and quick parts delivery from stock. For the 4,000+ drill heads sold in the last 25 years, parts are delivered in 48 hours worldwide. Berger multiple spindle heads are precision made. The housing is made out of a special aluminum used in the aircraft industry. Housings of cast iron or steel are also available. All rotating parts are case hardened (up to 62Rc) and ground. To optimize efficiency they are held in ball bearings. All gears are made from quenched and tempered steel, and can also be case hardened and ground for special applications. All spindles are double case hardened and precision ground. On CNC machine tools with automatic tool changer the drill heads are equipped with the appropriate V-flange taper. The adjustable positioning and locating plate ensures proper engagement of drive and position pin. This allows the automatic exchange of multiple spindle heads on most existing tool handling systems. For complex elaborate machining projects we offer a special construction with fixed center spindles, type MSBZ. These heads are dedicated to the appropriate hole pattern. Spindles with different RPMs are achieved through this design. It allows the highest possible degree of adaptation to the different cutting speeds and tool sizes. The possibility of tapping different pitches without length compensating holders is also a standard feature.
Options
Option with coolant distribution on the spindle side of the head is available. The standard gear ratio on the MSBU kit system is 1:1 (tapping operations).
Applications
MSBZ :: These versatile, rugged, and precise heads are available in a wide range of spindle and housing designs so you can produce optimal results in a great variety of applications. MSBS :: A unique precision bearing system provides a very rigid support and a perfectly round rotation suitable for applications involving solid carbide tools.
Series
MSBZ - Our top-selling precision multispindle drill heads--collet systems or quick-change holders
MSBS - Highest quality--ABS or HSK tooling systems